OLED 0.91" White 128X32 I2C IIC Display Module

onboard SSD1106 display driver is U8GLIB compatible

Ideal for GOTEK USB / Floppy drive OLED modification

https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods#oled-display

The OLED modification detailed above works with Flashfloppy firmware or HXC firmware

   It will not work with original Factory firmware.

SSD1306 Graphics Drive IC - Only 4 connections GND VCC SCL SDA

Suitable for Arduino, PIC, MSP430, STM32, ESP8266, Raspberry Pi projects

These displays are Tiny!! Only 38mm x 12mm x 2.6mm (exc pins)

Ultra Low Power as with OLED there is no backlight required

Runs on 3.3V or 5V with no level shifters required.

This display is fully supported by the u8glib library

so is easily used on Arduino or ESP8266

In the u8glib driver, simply uncomment this line

to select the correct driver:

   U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NO_ACK);

Also Works with the Adafruit SSD1306 + GFX Library

   just change i2c address in 128x32 demo from 0x3D to 0x3C

   display.begin(SSD1306_SWITCHCAPVCC, 0x3C);

Libraries Here:

https://github.com/adafruit/Adafruit_SSD1306/archive/master.zip

https://github.com/adafruit/Adafruit-GFX-Library/archive/master.zip

Package Includes:

1x 0.91" White I2C OLED display