Rotary Encoder with Top Clickable Switch + Knob + PCB + Cables

20 positions per revolution - Continuous Rotation

Supplied with Black Plastic Knob with white pointer

Designed for Gotek FlashFloppy.

Supplied with 4x Female-Female Dupont cables as required by Gotek / FlashFloppy

   - no soldering of encoder required to install :-)

Gotek FlashFloppy drive is for illustration purposes only and is NOT supplied.

Works with GOTEK / FlashFloppy - see here:

   https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods#rotary-encoder

and here:

   https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods#kc30-rotary-header

Using the images in the above link, the wiring is as follows:

A   -   DT    (Blue Wire)

B   -   Clk    (Red Wire)

SW - SW    (Green Wire)

GND-GND (Black Wire)

Rotary Encoder Specifications (NOT including PCB):

Size (L x W): Approx. 15 x 12mm

Shaft Full Length: Approx. 15mm

Shaft Diameter: Approx. 6-6.5mm

Splines Shaft Length: Approx. 5.5mm

Output: 2-bit gray code

Closed Circuit Resistance: 3 ohms maximum

Max. Rating: 10 mA @ 5 VDC

Shipping list :

1x Clickable Rotary Encoder 5 pin on PCB with soldered 0.1" pins

1x Washer

1x Nut

1x Black Plastic Knob with white pointer

4x Female-Female Dupont cables