Rotary Encoder with Top Clickable Switch + Knob + PCB + Cables
20 positions per revolution - Continuous Rotation
Supplied with Black Plastic Knob with white pointer
Designed for Gotek FlashFloppy.
Supplied with 4x Female-Female Dupont cables as required by Gotek / FlashFloppy
- no soldering of encoder required to install :-)
Gotek FlashFloppy drive is for illustration purposes only and is NOT supplied.
Works with GOTEK / FlashFloppy - see here:
https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods#rotary-encoder
and here:
https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods#kc30-rotary-header
Using the images in the above link, the wiring is as follows:
A - DT (Blue Wire)
B - Clk (Red Wire)
SW - SW (Green Wire)
GND-GND (Black Wire)
Rotary Encoder Specifications (NOT including PCB):
Size (L x W): Approx. 15 x 12mm
Shaft Full Length: Approx. 15mm
Shaft Diameter: Approx. 6-6.5mm
Splines Shaft Length: Approx. 5.5mm
Output: 2-bit gray code
Closed Circuit Resistance: 3 ohms maximum
Max. Rating: 10 mA @ 5 VDC
Shipping list :
1x Clickable Rotary Encoder 5 pin on PCB with soldered 0.1" pins
1x Washer
1x Nut
1x Black Plastic Knob with white pointer
4x Female-Female Dupont cables
GOTEK FlashFloppy HXC Rotary Encoder modification kit Floppy Emulator
- Brand: Gotek
- Product Code: ENC_PCB_CBL
- Availability: 40
-
£4.49
-
- 2 or more £4.31
- 5 or more £4.27
- 10 or more £4.22
- 20 or more £4.13
- 50 or more £4.04
Related Products
Tags: Rotary, Encoder, 5 pin, Knob, Top, Clickable, Switch, 0.1", Breakout, board, PCB, cables, Gotek, FlashFloppy, HXC, Floppy, Emulator, mod, mods, modification, kit