USB C CAN Bus Adapter Module STM32G431 Canable 2 CAN + CAN FD Linux RasPi Windows

Can use SLCAN or CANDLELIGHT firmware

Supplied with CANDLELIGHT FW Installed.

1. High performance STM32G431 microcontroller @ 170MHz.

2. Supports CAN2.0A CAN2.0B and CAN-FD protocols, faster rate.

3. Supports firmware update.

4. Support for open source host computer Cangaroo CAN protocol analysis software.

5. Easy to use, with three-color LED status indication.

6. Compatible with Cangaroo / SocketCAN / Cantact-app on Windows / Linux / MAC

Compatible with Open Source canable project 2.0 devices / firmware

More info here:

https://canable.io

Choose firmware and install here:

https://canable.io/updater/canable2.html

Product parameters:

Interface: Type-C

Product size: 45mm * 20mm

Instructions for use:

1.Type-C female: through the USB cable access to the computer

2.BOOT boot: short connect and insert TYPE-C, it will enter BOOT mode, you can re-burn firmware

3. Termination Resistor Option: Insert the jumper cap to indicate access to the 120Ω termination resistor.

4. Output interface: CAN_H and CAN_L access CAN bus GND can be connected or not.

5. Inserted into the computer, the board will light up the three-color lights. Serial devices will appear in the device manager.

USB Type C cable is NOT supplied

Package Includes:

1x USB to CAN module